North Asian Company

About > Company Profile
Dear Sir,

First of all we would like to introduce ourselves, we are one of the biggest manufacturers, specializing in wooden flooring and wooden panel in Vietnam. Our products are now mainly exported to Japan, Taiwan, Korea...

We would like to make a good business with you by offering our products such as floorings, decking, decking tile and wooden panel are made from Laos pine, Vietnam Pine, Acacia, Pyinkado, Pomu ( Hinoki), Takkyan ( Asian Walnut ), Narra Padauk, Oak, Beech, ...with wide range of products from Solid flooring, Finger joint (UNI) flooring, Finger Joint Laminate flooring(FJL), Bangkirai decking, Acacia decking tile and Vietnam Pine Finger Joint Panel, window, door Jamb ( scantling), engineered wood flooring.

1.Wooden flooring:
Size: 14/15/18 mm x 90/120/150 mm x 300/450/600/750/900/1050/1200/1500/1820mm
A - Grade: The face shall be practically free of defects- no sap wood/ no heart wood/ no blue stain/ and no crack. A grade admits some small healthy knots with a max. diameter of 5.4 mm, with an allowance of 2 knots every running meter for 90mm wide and below. 3 knots are allowed for 120 mm wide and above. Uniform of color with small limited character marks.
B ?Grade : The face may contain small streaks, burls, slight imperfections, black lines, black colored knots and tight knots which do not exceed 2.45mm, with an allowance of 4 knots every running meter for 90mm wide and below. 6 knots are allowed for 120 mm wide and above. Knots should be repaired. In principle free of sapwood. . More color variation allowed within the parcel.
C ?Grade : The face may contain sapwood, big streaks, burls, imperfections, and knots which do not exceed 3.54mm in diameter. No pin worm hole is allowed. C- grade allows colored repaired knots. Sapwood is allowed for max. 30% of the width and 30% of the height. Sapwood should be repaired.
The quality of ABC Grade:
KD: 12%
Less than 2 mm bending over 1000mm running meter Cupping is not allowed.
Tolerance on length: +/- 1 mm
Tolerance on thickness: +/- 0.1mm ( 15 thick and less), +/- 0.2mm ( 18 thick and less )
Wood species: Pyinkado, Narra Padauk, Takkyan, Hinoki, Oak, Laos Pine
Packing: Nylon, Carton and Pallet

2.Acacia decking tile
Size: 24x500x500 mm ( T x W x L)
Size of Lamella : 12x50x500 mm ( T x W x L)
Structure : Acacia decking tile is made from 9 surfaced lamellas and 3 bottom lamellas and are matched to each other with glue, screws and nails.
8-12% kiln dried
Quality:
1.Surface quality:
- A side is the front ?view of the product. B side is the side view of the product. C side is the bottom side view of the product.
- Sapwood is not allowed on the A and B side .
- Diameter of dead knots on the side A and B is not exceeded 10mm. Dead knot on C side is not over 25 mm.
- All dead knots are fill out with pasta ( wood flour mixed with glued ), same color with product抯 color.
- No rotten, decay, blue stain, no bowing.
Processing quality:
- Allowed tolerance for lamellas in width and thickness: +/-0.1mm.
- Product抯 surface must be treated with sandpaper, to be clean and clear and polished with oil.
- All lamellas must be bevel ?edge with radius of 2 mm.
Packing: Nylon, Carton and Pallet

3.Decking
Size: 20/30x105x2700/3000mm
Grade A. One side free of defect. No crack, no cupping, no knot, no blue stain, no sapwood, no pinhole. One face grooves for non slip protection, Pencil round chamfer the long corner.
KD : 25%
Wood species: Bangkirai ( Yellow Balau ), Laos Pine
Packing: Nylon, Carton and Pallet

4.Pine Finger Joint Panel ( FJL Board )
Size: 18/24/33/36/38x300/610/915/1220x2300/2440/3640/4200
KD: 12%
Grade A: No crack, no pinhole, no blue stain, no knot, lamella width 45mm
Grade B, C: No crack, no pin hole, blue stain are allowed, knot allowed to be repaired.
Wood species: Vietnam Pine, Acacia, Pomu
Packing: Nylon, Carton and Pallet

5. 3 layers window scantling ( 3 layers )
Size : 72mm x 86mm x 5900/6000mm
KD : 12%
Grade A : No crack, no pinhole, no blue stain, no knot, lamella width 45mm
Grade B, C : No crack, no pinhole, blue stain are allowed, knot allowed to be repaired, lamella width 40-45 mm
Wood species : Vietnam Pine, Acacia, Pomu
Packing: Nylon, Carton and Pallet

Please let us know your requirement of products.
We are looking forward to hearing from you soon.
Faithfully Yours,


Dang Huu Dong
-----------------------------------
North Asian Company
307-CC2A- Bac Linh Dam ?Hoang Mai ?Hanoi
Tel: +84-4-6414481, 6414482, 6414483
Fax: +84-4-6414480
Email: nacowood@hn.vnn.vn, danghuudong@yahoo.com, dongdh@nacogroup.com
Website: http://www.nacogroup.com.vn


Company Name:

North Asian Company

Business Type:

Manufacturers

Address:

307-CC2A-Bac Linh Dam - Hoang Mai- Hanoi

City:

Ha Noi

State:

Country or Areas: Vietnam
Post Code:
Established:
-------------------------------------- Contact Information --------------------------------------

Contact Name:

Dang Huu Dong

Position:

Telephone:

84-4-6414481, 6414482, 6414483

Fax:

84-4-6414480
Email: To View Full Contact Details Pls Click Here. (Only For Premium Member.)
Homepage: http://www.nacogroup.com.vn
Send Message to the Company
From: Your Email
To: North Asian Company
Subject:
Message: