australasian sheet and panel ltd

Dear sirs/madam,

Very glade to find your info on internet. Hope this is the starting point for the business co-operation between our companies.

New Zealand Australasian Sheet and Panel Limited is a group company who owns 5 factories in China. I can offer you, my valuable potential customer, good service, competitive prices and quality products.
(1) Gypsum board mill
1200x2400,1200x2700,1200x3000mm
Thickness can be 9mm,10mm,12mm
Current market: South Korea, Australia, New Zealand, Middle east .
(2) New Zealand radiate pine plywood mill
This mill only uses New Zealand radiate pine logs to make construction plywood and form plywood strictly according to the standard of AS/NZS 2269 or BS6566.
1200x2400,1220x2440 series products. Thickness can be 7,9,12,15,17,21mm
From plywood: thickness can be 12,15,17,18,21mm
Main market: Australia, New Zealand, USA and Europe.
(3) Paulownia joint board mill
Usual biggest size: 1200x2500mm, thickness can be from 12mm to 27mm.
Also can manufacture finger joint paulownia stick, any size and longest length can be 12m.
Current market: USA, Korea, Japan and Europe.
(4) 2 plywood mills
Most popular products are plywood with poplar core, okoume/bingtangor face and back, form plywood with poplar core.
Main market: Australia, New Zealand, USA, France, S Korea, Europe and middle east.
If you like to get more info about my products, pls contact me directly.

Mike Yang, General Manager
1/7 Fraser Road, Panumre, Auckland, New Zealand
Phone: ( 0064 9 ) 574 0319
Fax: ( 0064 9 ) 574 0318, 574 0325
Email: asapnz@xtra.co.nz