Introduction Of Products
Specification:
Quality:
Product Origin:
Other Message: |
Silicon rubber for mold making applications
1.Silicon rubber for mold making can used for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry
2.Silicon rubber for mold making is applicable for large statue Buddha, relieve, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold
3.Silicon rubber for mold making is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicon rubber for mold making features
Silicon rubber for mold making is white flowing liquid with general hardness of 22-50 shore A after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Silicon rubber for mold making operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
Shelf life for silicon rubber for mold making
10~12months, when stored in a dry & cool place under the room temperature 25
Packing for silicon rubber for mold making
1kg/ bottle, 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing 200 kg/drum
For more information pls feel free to contact Mr Sales Manager: Tony
Office No : 0086-755-89948006
Mobile : +86 18938867516
Skype : kimberly_802
Email: tony20140305atgmail.com
Welcome to our website www dot szrl dot net |
